GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

parts for front doors bi-amping

davide.bonetti

Ready to race!
Location
ITALY
I am looking at bi-amping the front doors speakers, it means I need separate wires going to the woofer and tweeter. Then I will use an external amp with integrated DSP.

Does anybody know if the door connector has two empty positions, and the part numbers for the male and female contact pins?
 

Adurm

Go Kart Newbie
Location
Fl
I spliced into the front signals at the back of the glove box unit. Ran that to my dsp. Sent that processed signal to my amp. Then mid speaker wire back to the wires i cut at the mib for front signal. Ran fresh wires from the amp under the dash and to the tweets. Not sure if that helps you or not but it works great for me.
 

davide.bonetti

Ready to race!
Location
ITALY
we're kind of talking about the same thing.

if you ran fresh wires to the tweeters you should still have passed through the door connector, or am I missing something?


Sent from my iPhone using Tapatalk
 

Adurm

Go Kart Newbie
Location
Fl
Tweets are in the a pillar. No door plug involved. Used a metal clothes hanger to reach from the under dash to the tweet. Just gotta pull that a pillar off. It's tricky.
 
Top