7
Reverse rake
- Thread starter Wetelvis
- Start date
exentix
Passed Driver's Ed
- Location
- central pa
typically springs take a little time to settle, were they just installed?
Installed Saturday same as when pic was taken. Hasn’t changed with about 160km of driving.
Sandman GTI
Drag Race Newbie
- Location
- Tennessee USA
I would also look at it after a while and on a flat surface.
I some have used a rear Audi pad to lift the back end.
Try searching Audi spring pad or spacer.
I some have used a rear Audi pad to lift the back end.
Try searching Audi spring pad or spacer.
nype
Drag Racing Champion
- Location
- Vancouver, B.C.
DSG will be somewhat heavier up front. Not sure if you’re DSG or 6MT.
snobrdrdan
former GTI owner
- Location
- Southeast Michigan
Install 2 of these, part number: 8J0512149
GTI Jake
Autocross Champion
- Location
- Charlotte, NC
I used Audi rear spring pads on my 6MT with VWR springs. They're about 10mm thicker
golfdave
Autocross Champion
- Location
- Scotland (U.K.)
- Car(s)
- Mk7 Golf GT Estate
the cars are level, just if you look carefully you will see that the front arch is a near perfect radius...the rear arch is not & is flattened from the top, thus making you think the rear is lower down to the ground....
more pronounced on the estate due to different rear bumper...
more pronounced on the estate due to different rear bumper...