shout out to @h22 hatch for coming in clutch. got the tails recoded but I have a left side bulb out/turn signal warning on the car? I think Jbale had the same thing and coded it out?
Bulb out on dash. Only comes on when the headlights turn on (running lights trigger it) otherwise no error thrown on dash. Everything works correctly tho.Awesome! Glad it worked out! Is the warning on the dash or just when you scan it?
Did you solve the problem?
Are the replica tails you bought the ones from ali? And are they dynamic and do they have rear fog lights?Good evening everyone. I managed to solve the problem. First of all, I’m using Chinese replicas with built in harness into the lights themselves. The problem was solved by using these 2 codings.
This coding would most probably work if you’re using replicas, not original. Other than that, the replicas were plug and play to my US spec original sockets. All I had to do was add a wire that connected the outer turn signals to the inner ones.
Sent from my iPhone using Tapatalk
+1 if you could post a video of them in actionAre the replica tails you bought the ones from ali? And are they dynamic and do they have rear fog lights?
Sent from my SM-G950U using Tapatalk
+1 if you could post a video of them in action
Sent from my SM-G930W8 using Tapatalk
Are the replica tails you bought the ones from ali? And are they dynamic and do they have rear fog lights?
Sent from my SM-G950U using Tapatalk
Bulb out on dash. Only comes on when the headlights turn on (running lights trigger it) otherwise no error thrown on dash. Everything works correctly tho.
Sent from my Pixel 2 XL using Tapatalk
Well considering my old coding makes little sense it's hard to compare to what I used to haveInteresting. My guess is something is coded as halogen when it should be LED?
Well considering my old coding makes little sense it's hard to compare to what I used to have
Sent from my Pixel 2 XL using Tapatalk