Gawernator
Go Kart Champion
- Location
- Fremont, CA
$323 is for both bars. You wouldn't want to be unmatched ...
Yeah but it's $500 and Eurocode's is $323 and has adjustability. Kind of a no brainer https://www.ecodetuning.com/eurocod...-bar-set-mqb-fwd-chassis.html?category_id=650
$323 is for both bars. You wouldn't want to be unmatched ...
In this kit what brackets are used with the front?
OE would have to be drilled out.
Not sure if usable after.
You drill the nuts out and they supply you with new hardware. You don't have to buy anything else besides the bars and use supplied bushing and hardware. I like the red Powdercoating too although nobody will ever see it haha
Reason for my question was the picture shown of the kit had no brackets.
Quality of brackets would also determine choice for me.
They show bushing but not front brackets.
I know rears easy to reuse.
$323 is for both bars. You wouldn't want to be unmatched ...
Pretty sure more people are unmatched than they are matched. I've seen many more rear sway bar replacements than I have front/both.
You reuse the bracket itself
To get the front brackets off does one not have to drill out the nut as they are a press fit? Once drilled is the nut now not usable?
My Eibach fronts came with vw bracket mounted over bushing and on bar.
Not a simple remove and replace.
Sorry for questions.
Yeah but it's $500 and Eurocode's is $323 and has adjustability. Kind of a no brainer https://www.ecodetuning.com/eurocod...-bar-set-mqb-fwd-chassis.html?category_id=650
To get the front brackets off does one not have to drill out the nut as they are a press fit? Once drilled is the nut now not usable?
My Eibach fronts came with vw bracket mounted over bushing and on bar.
Not a simple remove and replace.
Sorry for questions.
Not really a no brainer my Eurocode front sway now is good for wall art or the recycle bin. Also if you screw up the OE removal you're in a bad place.
I'd suggest going APR w/ brackets(or other manufacturers with an included bracket), that way you can resell it.
Yes, and they don't sell just the special hexnuts, so if you remove the Eurocode bar you can't do anything with it.
They have a full color instruction guide on their website. They give you replacement nuts to replace the ones you drill out