Eddie's sexy white 2016 GTI SE PP 6mt

Hey guys just wanted to start my own build to keep track of everything before I forget lmao.

So as the subject says got the beautiful white 2016 GTI se pp non lp.

1.5k
K&n drop in filter
Tints 15% front two 10% for the rest
Wells window deflectors
eBay blind side side mirror stick on things


5k
First oil change with royal purple
Cts bov
Snow catch removal

7800k
Stock clutch died and replaced by vw


8500k
Cts high flow turbo inlet pipe
Cts high flow turbo/intake silicone hose pipe
Ed stage 1.5 93 octane std


Still pending to put on because of being a lazy good for nothing:

-in closet
--034 dog bone mount version 2 revision 2
-- ecs shift cable brushings

-to do/buy:
-- free clutch bleeder mod or cts bleeder block
-- cts turbo back exhaust?
-- cts fmic ??


Any advice or opinions welcome.



Sent from my iPhone using Tapatalk

So what was feeling in the clutch?
You tuned engine after new clutch installed.
Upgrade clutch or did VW put OE clutch in?

Clutch feels amazing lol and is the stock clutch. I think i just got lucky and picked the dealerships tester cause I got it with 80 miles lol or a faulty clutch. I waited 500 miles before tuning.

Burning smell

https://r.tapatalk.com/shareLink?ur...share_tid=16142&share_fid=112413&share_type=t

That is the post regarding the whole clutch issue lol it was slipping then slipped to death


Sent from my iPhone using Tapatalk

Finally installed these
--034 dog bone mount version 2 revision 2
-- ecs shift cable brushings

I'm at about 18k miles now, have done 3 oil changes with royal purple and love it.

Disconnected soundaktor today

Going stage two this weekend once my CW Turbo Back Exhaust arrives and going to also do some drilling on the grill for the intake lol

I would suggest doing that clutch spring removal. I have yet to do the bleeder block but the spring removal was pretty awesome imo.

Oh if you are messing with that area I would do the knob too! I got a raceseng knob and its been fantastic (honestly like it better than BFI/ECS whoever)

I might do it now in my lunch break


Sent from my iPhone using Tapatalk

Totally forgot I had this post lol.

Since last post installed:
034 dog bone mount version 2 revision 2
ecs shift cable brushings
USP Short shifter front and back + side2side
USP Steel Clutch line
Circuitwerks Full TBE
Free bleeder mod
Free spring removal mod
South bend stage 3 daily clutch
Roc euro intake
DV+
Eurodyne Stage 2 93oct adjustable file at 24psi and 95oct

OBD ELEVEN
Joker tails
Fogs on with drls
Comf Turn signals at 5 blinks
Lock fob with car on


Next on list:
Tint tail lights, just keeps raining
Intercooler
Engine/trans mounts - thinking either 034 or revo
Charge pipe kits


future- either is38 or something else if eurodyne maestro ever comes out

Installed ECS TBD since i got it for 50$ on fb.

Also rethread one of the ignition coil bolt hole that was stripped when putting RS7 plugs

https://www.youtube.com/watch?v=hqNN38ksGe0



Also have had my horns replaced, first low tone, then high tone by VW. Miami rain is causing them to short out. Low jsut went out again. Going to have to set an appt again. If not im going to see if they install after markets for me for free if theirs won't fucking last through summer storms.