GOLFMK8
GOLFMK7
GOLFMK6
GOLFMKV

Vogtland Coilovers on Base Golf 1.8T (50mm Front Struts)

mach128x

New member
Location
Canada
O.P., is it Vogtland p/n 956142 ?

I find the catalog on Vogtland North America's website isn't very clear on the drop range. They only state a single value: 1.4"

That can't be the lowest drop. At least looking at your latest pictures, this looks lower than 1.4" for sure.

So it would be the minimum? Or mid-range ?

At the time you took the first picture, how far from the highest setting were you?

Edit: I found p/n 968737 on Vogtland's european e-shop at http://shop.vogtland.com . Not sure if we get the exact same builds (maybe under different kit #'s) this side of the pond.
They state ajdustable range 1.38"-2.56"

Partnumber 968737
Brand Volkswagen
Model Golf VII, Typ AU, 2WD, nur / only Mehrlenker-HA / multi-link rear axle, Federbein / strut 50 mm, ohne elektronische Dämpferregelung / without electronic dampers
Lowering Front / Rear 35 - 65 / 35 - 65
max. permitted Axle loads VA 1080 kg
max. permitted Axle loads HA 980 kg
TUEV TÜV
Approval ga7-172098-Vogtland-GFW801GF07-08-14_1004-16.pdf
Remarks

- only for Multilink rear suspension
- Not for vehicles with electronic damping adjustment.
- For cars with 50 mm Suspension Strut.
- Height adjustable at the front and rear axle (threaded strut housings).
- Excludes 4 wheel drive.

Build from 1 Nov 2012
Description Hight adjustable Coilover
without adjustable damping force
 
Last edited:
Top