7
Official VMR Wheels Thread
- Thread starter VMRWheels1
- Start date
Crud_muffin
Ready to race!
- Location
- US
- Car(s)
- e-Golf
Plans?
Gawernator
Go Kart Champion
- Location
- Fremont, CA
Driver gear springs.. I already own them. Part of me wants more like a 1.5-2" drop instead of the 1", but realistically it will be better for daily driving...
nype
Drag Racing Champion
- Location
- Vancouver, B.C.
Diggs24
Autocross Champion
- Location
- de plains! de plains!
- Car(s)
- 2015 GTI
Might look ok in rear but front will poke. It won't be awful. Enjoy the wheels.
terp_man
Passed Driver's Ed
Thanks!
Brandon from VMR had this to say.
"We have quite a few customers who go with the ET35 on the MK7, however, the front is slightly aggressive and will likely require the fender screw mod to gain a few mm of clearance. The ET35 fits perfectly in the rear, just not the front. The 225/40/18 works just fine also, but many choose the 235."
Sent from my iPhone using Tapatalk
nype
Drag Racing Champion
- Location
- Vancouver, B.C.
I should've clarified. I have the Nogaros
Also that fitment calculator already assumes the wheels are flush, does it not? There's quite a bit of room to play with on a stock suspension.
Sent from my iPhone using Tapatalk
Aren’t the Nogaros the same spec as the Austins?
So they way I see it, it’s kind of like running the Austins with 25mm spacers on all 4 corners. Most spacer flush kits for the Austins are 15mm front and 20mm rear. That’s all I was comparing against. NBD I suppose.
Great choice of wheel BTW. Love those 710s.
terp_man
Passed Driver's Ed
Haha. Want I'm hearing is I should probably back out of this sale while I still have time.
Sent from my iPhone using Tapatalk
Lord_Flexington
Drag Racing Champion
- Location
- Syracuse
- Car(s)
- 15 MK7 GTI LP PP
Matthewpt
Ready to race!
- Location
- Newark, DE
