Help!!
I was changing lighting settings using VCDS, to change the blink feature while using turn signals and my car lighting is jacked up
Bad Symptoms:
-I'm getting an error saying both my DRL's are out
-The DRL's don't turn on when using Parking lights
-Only left fog works
- Only left for lights up for coming up lights
I'm really hoping someone can help me set everything back to default. Here are the changes I made... and the warnings came after (12)-Leuchte2SL I think.. does anyone know the default values for (12)-Leuchte2SL and (12)-Leuchte3SL ?
--------
DRL TURN SIGNAL DIM
If you want the DRL to dim when indicating, make sure:
(6)-Leuchte2SL VLB10-Dimmwert AB 2 and (6)-Leuchte3SL VRB21-Dimmwert AB 3) is 100. 127 causes it to stay bright. There is no difference between 100 and 127 in light output.
Same for the CD Channel brightness. Default is 26, but I like mine at 100. Just don't use 127.
Then simply set:
(12)-Leuchte2SL VLB10-Lichtfunktion E 2 = Blinken links aktiv (beide Phasen)
(12)-Leuchte3SL VRB21-Lichtfunktion E 3 = Blinken rechts aktiv (beide Phasen)
(14)-Leuchte3SL VRB21-Dimmwert EF 3 = 26
(14)-Leuchte2SL VLB10-Dimmwert EF 2 = 26
(15)-Leuchte2SL VLB10-Dimming Direction EF 2 = minimize
(15)-Leuchte3SL VRB21-Dimming Direction EF 3 = minimize
Thanks a ton to anyone who can help!!