New!! ECS Rear Subframe Brace | FREE Shipping

New ECS Rear Subframe Brace

Reinforce and stabilize the rear end of your MK5, MK6, or MK7 VW with our Rear Subframe Brace!
Aggressive driving takes its toll on the factory subframe which can deflect under hard cornering, especially with a larger rear sway bar.
We tightened up the rear subframe with a sturdy brace sure to hold up under even the most stressful conditions.


Click HERE for your VW MK5 GTI/Rabbit/Jetta (2005 - 2010) ECS Performance Rear Subframe Brace Upgrade
Click HERE for your VW MK6 Golf/GTI/JSW (2010 - 2014) ECS Performance Rear Subframe Brace Upgrade
Click HERE for your VW MK6 Jetta w/ Independent Rear Suspension (2011+) ECS Performance Rear Subframe Brace Upgrade
Click HERE for your VW MK7 Golf/GTI/GSW (FWD) w/ Independent Rear Suspension (2015+) ECS Performance Rear Subframe Brace Upgrade



The factory rear subframes in the VW MK5, MK6, and MK7 are perfectly capable of withstanding everyday commutes but are woefully ill-prepared to handle beefier sway bars, stiffer suspension components, and aggressive driving.



We found a sturdier solution:
With the ECS Rear Subframe Brace you can reinforce the subframe at the sway mounting points to ensure the added pressures of hard driving and stiffer components will be deflected through our brace rather than deflecting the rear subframe.





Click HERE for your VW MK5 GTI/Rabbit/Jetta (2005 - 2010) ECS Performance Rear Subframe Brace Upgrade

Click HERE for your VW MK6 Golf/GTI/JSW (2010 - 2014) ECS Performance Rear Subframe Brace Upgrade

Click HERE for your VW MK6 Jetta w/ Independent Rear Suspension (2011+) ECS Performance Rear Subframe Brace Upgrade

Click HERE for your VW MK7 Golf/GTI/GSW (FWD) w/ Independent Rear Suspension (2015+) ECS Performance Rear Subframe Brace Upgrade

The RSB brackets bolt to this bar in the pictures.
But the brackets bolts normally also bolt to the car.
Will the bracket bolts now pass through the bar and into the car?
Wanted to verify how it bolts up.
Picture a little hard to see.
Any schematic drawings.

Sandman GTI said:

The RSB brackets bolt to this bar in the pictures.
But the brackets bolts normally also bolt to the car.
Will the bracket bolts now pass through the bar and into the car?
Wanted to verify how it bolts up.
Picture a little hard to see.
Any schematic drawings.

Click to expand...

+1 what he said..

Wish they would stop making all these new shinny objects to buy.
I will never stop modifications.

The brace says it fits my MK7 GTI 2.0 Gen 3 but the brace package says it doesn't? What gives about the package? Also in for the answer to the bolt question. Edit, it appears as if the bolts pass through.

They pass into the car still, the nuts on the bolts in the photo are to just show the bracket on the bar, and we couldn't get it to hold still without them. There should be a note on the site about that... if not I'll add it here in a few.

-James

ive thought about grabbing this to be the test rodent for it...i was gonna try it prior to upgrading the rsb to see how it works

the site doesnt show the product.
also i assume that it wont fit the R awd models.

949 said:

the site doesnt show the product.
also i assume that it wont fit the R awd models.

Click to expand...

You are correct, FWD fitment only on this product.

-James

Back In Stock!!!!