In your case, no. For the Golf guys running IS20s they have to. Look at twindads log up above and select load.
Gotcha. Any reason to why you turned it off?
Sent from my iPhone using Tapatalk
In your case, no. For the Golf guys running IS20s they have to. Look at twindads log up above and select load.
Gotcha. Any reason to why you turned it off?
Sent from my iPhone using Tapatalk
Turned it off to mess around. never bothered to put it back. also 8.5 is on the cusp and i want that 8.5
Few logs before I flash the car to stage 2 and stack (in a few days)
https://datazap.me/u/marc5800/log-1508368293?log=0&data=1-2-3-4-5-6-11-18
https://datazap.me/u/marc5800/log-1508368293?log=1&data=1-2-3-4-5-6-11-18
Anything to be worried about?
Sent from my iPad using Tapatalk
Looks perfect.
It doesn't like those numbers.
I've got a question for y'all fine folks. Last I had the car before my rad hose burst, (from memory) I tried to set my values to:
2.5
3.5
4.5
5.5
7
8
8
8
8
8
7
6
or something like that, and whenever it saved it saved something wonky like:
2.6
3.4
4.5
5.5
7
7.9
7.9
7.9
7.9
7.9
7
6
or something along those lines. Is this what's related to the 6cyl=1 nanny? Even if it is why did the 2.5 and 3.5 turn into 2.6 and 3.4?
Any particular reason why? I've seen other people use these numbers in this thread, in fact I took it straight from Perry's numbers.
Hey all this is my first time logging and I wanted some more experienced users to glance at my logs for me.
This first one is map 2
boost fail safe 26psi
FOL 40
https://datazap.me/u/zoominms3/map-2-log-1?log=0&data=1-4
ambient temp 53*
93 / 10% ethanol pump gas. mods: 2017 GTI Sport | JB4 | VWR springs| Forge FMIC | Injen Intake | Custom cat-back
These next 2 are with the APR stage 1 settings another user posted
1500 15
2000 16
2500 17
3000 21
3500 24
4000 22
4500 21
5000 20
5500 20
6000 20
6500 19
7000 18
boost fail safe 26psi
FOL 40
https://datazap.me/u/zoominms3/map-6-log-1-apr-clone?log=0&data=1-4
https://datazap.me/u/zoominms3/map-6-log-2-apr-clone?log=0&data=1-4
same mods, same fuel, same ambient temp.
Confirm AFR/Fuel bias are all set to 100.