Tried helping out someone with this yesterday on his 2019 GTI SE (US) using VCDS and did my usual "no display" setting but no change. I did the same thing on my 19 GSW 4mo and it worked for me. Something I am thinking is that it might be related to the KESSY module with something hard coded...
Funny you mentioned Kufatec harnesses being short. That is certainly not the case with the footwell light harness I used as I had at least 2-3ft left over near the BCM with plenty of slack on each side and wiring was run with the factory wiring harness. I had to wrap it up and tesa tape it so it...
Gotcha! I was thinking I would be using the Kufatec kit over the AliExpress kit after hearing about how many issues you are all having with it. I know a local who did the retrofit on his now late Golf R a while back which I assist with but he did most of the work but he does have the correct...
I was thinking of retrofitting PLA/PDC on my 7.5 wagon/variant/estate but after seeing the troubles you have been having with just using the brackets, I may just stick with front/rear PDC and skip the PLA. Otherwise, glad to see you getting everything up and running!
On the RHD wiring, of course, just found that so weird to hear as I just expected everything to run through the firewall in the same spot as LHD cars going off of where the fusebox/BCM are located.
I poked a hole in the grommet and used a wire hanger to push the wiring though the new hole. That...
I am honestly surprised that the RHD cars would run the cabin/engine bay wiring when the fuse box/BCM is on the left side of the car. I feel like that does not make too much sense. Then again, what do I know?
I have run wiring through that grommet and I feel your pain. I'll be running a few...
This is awesome! Seems like you are getting there! Are you going to order the 18.2mm cutting tool to clean up the side holes or just leave it as is?
Any desire to retrofit the rear camera along with the sensors? My previous 15 Golf had factory front/rear PDC but no camera. Once I retrofitted...
As StealthGTI mentioned before (Hi Scott!), I did load file 98 with the rented programer and I believe went 2-3 notches to the back using the fader. Then, messed with the equalizer to get me better sound. It is less harsh but still volume control is a bit too large of a jump between clicks. I...
Yeah. Someone made an illegal from the shoulder u-turn with a Dodge Ram 2500 HD without looking or signaling and I think you know where this is going.... It's been rough. At least I got into a long roof now with a longer warranty (even though I seem to be already voiding the electrical warranty...
Thanks for the reply. I have a FL 2019 GSW with the 6 speaker (which I only just found out about). After coding both with 60 and 98, I found no difference and I can barely turn it up past 30% without it being far too loud. Back when it was mixed with MIB1 2015 Golf, I can put it to half way and...